The U.S. wind energy industry experienced its fastest first-quarter growth since 2009, installing 2,000 new megawatts of capacity — enough to power about 500,000 homes — on its way to producing 5.5 percent of the country’s electricity.

The American Wind Energy Association (AWEA) also reported that another 21,000 megawatts of wind energy capacity is now under construction or in advanced development — enough to power an additional 5 million average U.S. homes. The AWEA said that 908 utility-scale wind turbines were erected in the first quarter of 2017, driving a nearly four-fold increase in wind energy growth over the first quarter of 2016. Forty-one U.S. states — most recently Rhode Island and North Carolina — now have utility-scale wind power projects. Texas is by far the wind energy leader in the U.S., with a wind power capacity of 21,000 megawatts.

Expanding its work in renewable energy, the National Center for Atmospheric Research (NCAR) is launching a three-year project to develop specialized forecasts for a major wind and solar energy facility in Kuwait.

"We're putting our expertise and technology to work around the world," said NCAR Senior Scientist Sue Ellen Haupt, the principal investigator on the project. "This landmark project meets our mission of science in service to society."

A recent discovery by Sandia National Laboratories researchers may unlock the potential of biofuel waste — and ultimately make biofuels competitive with petroleum.

Fuel made from plants is much more expensive than petroleum, but one way to decrease the cost would be to sell products made from lignin, the plant waste left over from biofuel production.

Lignin typically is either burned to produce electricity or left unused in piles because no one has yet determined how to convert it into useful products, such as renewable plastics, fabrics, nylon and adhesives. The electricity isn’t even available to the general public; it’s only used by companies that create large amounts of lignin, like pulp and paper manufacturers. Now Sandia scientists, working with researchers from Lawrence Berkeley National Laboratory at the Joint BioEnergy Institute, have decoded the structure and behavior of LigM, an enzyme that breaks down molecules derived from lignin.

How a wind energy facility is designed can influence the behavior of animal predators and their prey, according to a recent study published in The Journal of Wildlife Management by researchers at the University of California, Davis, and the U.S. Geological Survey.

Scientists placed motion-activated cameras facing the entrances of 46 active desert tortoise burrows in a wind energy facility near Palm Springs, California. Video recordings showed that visits to burrows from five predators -- bobcats, gray foxes, coyotes, black bears and western spotted skunks -- increased closer to dirt roads, and decreased closer to wind turbines.

British Columbia now has enough detailed information about the height, frequency and direction of its coastal waves to start developing and testing wave energy converters in the ocean, according to a new report released at an energy conference at the University of Victoria today.

Produced by the UVic-led Pacific Institute for Climate Solutions and co-authored by researchers at UVic’s West Coast Wave Initiative (WCWI), Wave Energy: A Primer for British Columbia summarises key research findings about the magnitude of BC’s wave energy potential, explains how wave energy converters work, and examines the opportunities and challenges of the sector.

A new survey on clean energy was released this week by the BC First Nations Clean Energy Working Group in partnership with UVic’s School of Environmental Studies and Clean Energy BC. The survey, “First Nations and Renewable Energy Development in BC,” had 105 responses from the 203 First Nations in BC. According to its co-author, Kara Shaw of UVic's School of Environmental Studies, this is the first attempt to document the range and impacts of renewable energy development by First Nations in this province.

Chicken is a favorite, inexpensive meat across the globe. But the bird’s popularity results in a lot of waste that can pollute soil and water. One strategy for dealing with poultry poop is to turn it into biofuel, and now scientists have developed a way to do this by mixing the waste with another environmental scourge, an invasive weed that is affecting agriculture in Africa. They report their approach in ACS’ journal Energy & Fuels.

Solar cells based on perovskites reach high efficiencies: They convert more than 20 percent of the incident light directly into usable power. On their search for underlying physical mechanisms, researchers of the Karlsruhe Institute of Technology (KIT) have now detected strips of nanostructures with alternating directions of polarization in the perovskite layers. These structures might serve as transport paths for charge carriers. This is reported in the Energy & Environmental Science Journal.

The perovskites used by the KIT scientists are metal organic compounds with a special crystal structure and excellent photovoltaic properties. Since their discovery in 2009, perovskite solar cells have experienced a rapid development. Meanwhile, they reach power conversion efficiencies of more than 20 percent. This makes them one of the most promising photovoltaic technologies. Research into perovskite solar cells, however, faces two special challenges: The light-absorbing layers have to be made more robust to environmental impacts and the lead contained therein has to be replaced by environmentally more compatible elements. This requires in-depth understanding of physical mechanisms that enable the high conversion rate of absorbed solar energy into electric power. 

By replacing the phosphor screen in a laser phosphor display (LPD) with a luminescent solar concentrator (LSC), one can harvest energy from ambient light as well as display high-resolution images. "Energy-harvesting laser phosphor display and its design considerations," published recently by SPIE, the international society for optics and photonics, in the Journal of Photonics for Energy, describes the development, processes, and applications of an LPD.

In a proof-of-concept experiment, lead author Ichiro Fujieda and his collegeagues at Ritsumeikan University fabricated a 95 × 95 × 10 mm screen by sandwiching a thin layer of coumarin 6 with two transparent plates. These plates guided the photoluminescent (PL) photons emitted in both directions toward their edge surfaces. After removing the light source in a DMD-based commercial grade projector and feeding a blue laser beam into its optics, the screen generated green images.

Researchers at North Carolina State University have found that a material which incorporates atomically thin layers of water is able to store and deliver energy much more quickly than the same material that doesn’t include the water layers. The finding raises some interesting questions about the behavior of liquids when confined at this scale and holds promise for shaping future energy-storage technologies.